Hydraulic Hoses - Fisher Xtreme V 44600-1 Installation Instructions Manual

44600-1, 44650-1, 44675-1, 44685-1, 44695-1, 44775-1, 44785-1, 44795-1

HYDRAULIC HOSES

Do not use thread sealant/tape on hoses and fi ttings.
This could damage product.
1. Attach all hoses to fi ttings, routing hoses as
shown. Leave hoses fi nger tight at this time.
1/4" x 16" Hose
To Lift Ram
1/4" x 42" Hose
To DS Rod
(Front)
3/8" x 42" Hose
To DS Base
(Rear)
3/8" x 38" Hose
To PS Base
(Rear)
1/4" x 36" Hose
To PS Rod
Lit. No. 44227, Rev. 10
(Front)
2. Wrap angle ram hoses with protective hose wrap
as shown. Start wrap on base-end hose so wrap
covers diagonal brace. Group hoses away from
brace and continue wrapping, forming a smooth
outward loop to the hydraulic unit.
3. Using a wrench to hold the hose end in position,
tighten all hose fi ttings 1/8–1/4 turn past fi nger
tight.
9 June 1, 2008