Fingerprint Sensor - HP ProBook x360 435 G7 Maintenance And Service Manual

Before removing the speaker, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
Remove the speaker:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the speaker to the computer.
2. Remove the speaker from the computer (2) .
Reverse this procedure to install the speaker.

Fingerprint sensor

To remove the fingerprint sensor, use this procedure and illustration.
Table 5-14 Fingerprint sensor description and part number
Description
Fingerprint sensor
NOTE: The fingerprint sensor cable is available in the Cable Kit, spare part number M03431-001. The
fingerprint sensor bracket is available in the Bracket Kit, spare part number M03436-001.
Before removing the fingerprint sensor, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 30).
Fan on page 41).
System board on page
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 30).
Fan on page 41).
System board on page
29).
45).
29).
45).
29).
Spare part number
M03434-001
29).