Qualified Personnel - ENGIE EPS easyWallbox User Manual

GB
1.
ABOUT THE USER MANUAL
Thank you for choosing easyWallbox. Please spend some minutes to read
the documentation to install and use it safely, discovering all its advantages.
easyWallbox is a revolutionary, easy-to-use charging station for electric
vehicles that can be installed both in Charging Mode 2, with connection
to the power supply by plug and cable, and Charging Mode 3, with
permanent connection to the power supply.
vehicle supply equipment with AC current delivers.
The information in this User Manual is for
users and concerns installation in Mode 2, safe use, and basic maintenance
of the device.
Read the associated documentation carefully to acquire familiarity
with the instructions and safety indications before installing the
product.
For installation in Mode 3 and other advanced functions, see the relative
documentation in the Installer Manual.
As it involves a permanent connection to the power supply,
installation in Mode 3 requires qualified personnel, qualified to
design and create a dedicated state-of-the-art power supply and
certify the domestic electrical system in compliance with local
regulations and the energy supply contract.
42
easyWallbox is an AC electrical
easyWallbox installers and
1.1. About installation in Mode 2
Installation of easyWallbox in Mode 2 sets out connection to the power
supply using plug and cable supplied with the device. Installation of the
product in Mode 2 must be carried out following the instructions in this
manual.
Even though intervention by qualified personnel is not mandatory
for installation in Mode 2, we recommend contacting qualified
personnel or service for any question or doubt concerning
easyWallbox's use, installation and maintenance.
1.2. Assistance
For information on assistance, please refer to chapter 11.
1.3. Symbols used
This symbol indicates imminent danger that
DANGER
may cause death or serious injuries.
This symbol indicates a dangerous situation that
WARNING
may cause death or serious injuries.
This symbol indicates a dangerous situation that
CAUTION
may cause slight injuries.
ATTENTION This symbol indicates a situation that may
cause material damage to easyWallbox.
Work that must be carried out by a technician,
QUALIFIED
from this point 'Qualified Personnel', qualified
PERSONNEL
to design, create a state-of-the-art domestic
electrical system and certify it in compliance
with local regulations and the energy supply
contract.
GB
43