GOLDEN MASK DEEP HUNTER PRO Manual page 7

GM Electronics Ltd.
a set of plastic pipes and fittings for assembling the supporting structure of the
frame.
The "antenna - cable" is composed of series-connected conductors in multi-
conductor special cable, which form a coil with certain parameters. It is
mounted onto frame of PVC pipes, joints and elbows, and fixed using the
enclosed cable connections type "Velcro". The connecting cable is plugged into
the connector labeled "Coil", which is mounted on the right edge of the front
panel of the electronic block. Connecting cable must be tightened after placing
connector.
Search with "frame" needs an assistant who helps the horizontal movement of
the frame, using one of the enclosed belts. With another belt operator brings the
detector and determines the height and direction of movement.
There are other ways for individual work with antenna type "frame" in which
the operator stands inside it and thus moves, holding both belts.
Categorically prohibits the use of this method, and "entry" to the operator or
another assistant on the "framework" of a metal detector Golden mask Deep
Hunter pro detector in working!
Adverse effects of the electromagnetic field can lead to serious health
problems and / or injuries!
Failing to work with assistant recommended "dragging" of the antenna for this
purpose can be used device type "sledge" made of non-metallic materials. This
device must provide a constant height (about 10 cm) frame above the ground.
Demand should always begin with a brief pressing the "RETUNE", which is
recommended to be carried out periodically during the search, in order to
maintain maximum sensitivity.
Golden Mask Deep Hunter pro2 – Instruction Manual
7