Download Print this page
Spin Master Air Hogs Zero Gravity Micro Wall Racer Instructions
Spin Master Air Hogs Zero Gravity Micro Wall Racer Instructions

Spin Master Air Hogs Zero Gravity Micro Wall Racer Instructions

Advertisement

Quick Links

®
GETTING TO KNOW YOUR ZERO GRAVITY MICRO™ WALL RACER
TO GET THE MOST OUT OF
YOUR ZERO GRAVITY MICRO™
WALL RACER PLEASE READ
THESE INSTRUCTIONS FIRST !
NOTE: USE ON SMOOTH, CLEAN
SURFACES ONLY!
Check to make sure contents are
complete:
• 1 Radio-Controlled Zero Gravity
Micro™ Wall Racer
• 1 Controller/Charger
CAUTION – ELECTRICALLY OPERATED
PRODUCT: Not recommended for
children under 8 years of age. As with
all electric products, precautions
should be observed during handling
and use to prevent electric shock.
BATTERY INSTALLATION
1. Loosen screw and remove the battery
compartment door.
2. Install six 1.5-V alkaline batteries (not
included) in the battery compartment
as shown. Make sure to follow the
correct positive (+) and negative (-)
polarities with the corresponding
markings inside the battery compartment.
3. Re-install the battery compartment door
and tighten the hold down screw.
1
Battery
Compartment
Door
2
Six
1.5-V
Alkaline
Batteries
Battery
Compartment
Controller/Charger
Your Zero Gravity Micro™ Wall Racer
has pre-installed rechargeable battery
inside the vehicle body.
INSTRUCTIONS
AH Zero Gravity Micro™
Wall Racer
CHARGING YOUR ZERO GRAVITY MICRO™ WALL RACER
1. Make sure the vehicles
ON/OFF switch is in the
"OFF" position. The
Zero Gravity Micro™ can
only be charged when
the vehicle is in the
"OFF" position.
3. Access
the charge
cable.
5. Slide the
switch on the
controller/
charger to the
CHARGE
position.
7. When charging
is complete, turn
the controller/
charger switch
to the "OFF"
position.
• Charging should take between 20 and 40 minutes depending on how much
charge is left in the battery. • NOTE: Do not charge the battery immediately
after use. Let the battery cool for at least 10 minutes. If charging is not
complete after a long period of time, replace the charger batteries.
The Air Hogs
®
Zero Gravity Micro
defies gravity with its wall climbing ability!
Featuring a suction throttle, that allows the
wall racer to perform full function while climbing
walls. FOR INDOOR USE ONLY.
ADULT SUPERVISION RECOMMENDED!
TM
PROBLEMS! Before you return to retailer,
please call our HOTLINE for assistance,
1-800-622-8339
Left
Joystick
Controller/Charger
4. Plug the
charging
cable into
the port in
the back of
the vehicle.
Make sure
the arrow is
on top.
6. The green charging
light will begin to
flash. When the green
light turns OFF, the
vehicle is fully
charged.
8. Store the
charge cable in
the storage
compartment.
TM
Wall Racer
Right
Joystick
2. Make sure
the controller/
charger switch
is in the "OFF"
position.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Air Hogs Zero Gravity Micro Wall Racer and is the answer not in the manual?

Questions and answers

Summary of Contents for Spin Master Air Hogs Zero Gravity Micro Wall Racer

  • Page 1 The Air Hogs ® Zero Gravity Micro Wall Racer INSTRUCTIONS defies gravity with its wall climbing ability! Featuring a suction throttle, that allows the ® wall racer to perform full function while climbing walls. FOR INDOOR USE ONLY. ADULT SUPERVISION RECOMMENDED! PROBLEMS! Before you return to retailer, please call our HOTLINE for assistance, 1-800-622-8339...
  • Page 2 WHILE DRIVING YOUR ZERO GRAVITY MICRO™ WALL RACER, MAKE SURE TO OBEY THESE RULES 2. Only drive on empty walls, (no hanging pictures or other obstacles) and avoid driving on walls that have anything underneath them. The Zero Gravity Micro™ could 4’...
  • Page 3 USING THE CONTROLLER FORWARD LEFT TURN REVERSE RIGHT TURN Push the LEFT joystick forward and the RIGHT joystick left or The LEFT joystick controls the right to control the vehicles’ vehicle Forward and Reverse. direction. TRIM ADJUSTMENT If the vehicle is not driving straight you can use the trim adjusters.
  • Page 4 Spin Master Toys UK Ltd., Meadowbank, Furlong Road, Bourne End, Bucks, for future reference. Patent Pending. SL8 5AJ, United Kingdom MADE IN CHINA. Spin Master France – 36 rue de Silly – 92100 Boulogne Billancourt – France North American Consumer Information Phone: 1-800-622-8339 www.spinmaster.com Asst.