Download Print this page
Spin Master FLIGHT RIDER Instruction Manual

Spin Master FLIGHT RIDER Instruction Manual

Bike

Advertisement

Quick Links

FLIGHT RIDER
INSTRUCTION GUIDE
POWER BUTTON + POWER LED
THROTTLE
STICK
MODE SELECT
(BEGINNER + ADVANCED)
For in-depth video instructions go to
STEP 1
HOW TO
INSTALL
BATTERIES
1. Press down on release button (A) to
slide down battery cover (B). If used
batteries are present, remove these
batteries from the unit by pulling up on
one end of each battery.
STEP 2
CHARGING
1. Move the power swtich on the FLIGHT
The charge port for the
RIDER™ to the OFF position.
FLIGHT RIDER™
is located on the
back of the rider.
APPROXIMATE DRIVE TIME: 4.5 Minutes.
APPROXIMATE FULL CHARGE TIME:
45 Minutes.
STEP 3
START UP
AND
BALANCE
MODE
1. Turn on the FLIGHT RIDER™
by sliding the power switch to the
ON position.
REPLACING ROTORS
CAUTION:
a
HAIR ENTANGLEMENT —
INDOOR USE ONLY
Tie back and cover hair and secure
loose clothing prior to play.
B
A
DIRECTION
C
1
A
A
B
B
1
THINGS TO REMEMBER:
BEFORE YOU RECHARGE THE BATTERY, WAIT 10-15 MINUTES TO LET THE BATTERY COOL DOWN.
1
2. Turn on the controller by
pressing the POWER BUTTON.
1 FLIGHT RIDER™
1 Controller
STUNT
BUTTON
AUTO LAUNCH &
STICK
ATTACHING
LANDING SKIS
AIRHOGS.COM/FLIGHTRIDER
2. DO NOT remove or install batteries
using sharp or metal tools. Install new
batteries as shown in the polarity diagram
(+/-) inside the battery compartment.
2. Plug one end of the micro USB into a
computer or wall adapter. Plug the other
end into the charge port on the back of the
rider. Only connect USB charging cable to
a computer or other 5VDC rated power
source.
2
3. FLIGHT RIDER™ headlights will
flash when the bike is pairing with
the controller. Headlights are solid
when paired.
CAUTION: Rotor to be replaced by adult only.
a
NOTE: If hair or debris gets caught in rotor and prevents
rotor from turning, remove and clean.
NOTE: pay special attention to replace rotors
with identical shaped rotors. There are 2
different shaped rotors (identified with a circle
or square) and their shape and placement can
directly affect flight performance.
For Video Tutorial go to:
AIRHOGS.COM/FLIGHTRIDER
NORTH AMERICA – 1-800-622-8339,
1-800-622-8339, customercare@spinmaster.com
UK – 0800 206 1191, serviceuk@spinmaster.com
IRELAND – 1800 992 249
AUSTRALIA –1800 316 982, customercare@spinmaster.com
CONTENTS
1 Rotor
4 x Spare
1 USB charging
2 x Landing
Removal Tool
Skis
Rotors
A
B
FORWARD/REVERSE
LAND BUTTON
ANTI–DRIFT
ADJUSTER
OFF / Charge
ON
POWER SWITCH
2
3. Replace battery door securely.
NOTE: Check your local laws and
regulations for correct recycling and/or
battery disposal. NOTE: HEADLIGHTS ON BIKE
WILL FLASH WHEN BATTERY IS LOW.
2
3
3. Vehicle charging when USB charging
LED is BLINKING.
4. Vehicle charged when USB charging
LED is SOLID ON.
3
4. You are now ready to play.
2
AAA
( LR03 )
x
1.5 V
Not Included
2 x
1 Instruction
cable
Precision Sticks
guide
C
LEFT/RIGHT
ANTI–DRIFT
ADJUSTER
CHARGE PORT
3
4
4
8+
YRS

Advertisement

loading
Need help?

Need help?

Do you have a question about the FLIGHT RIDER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Spin Master FLIGHT RIDER

  • Page 1 BEFORE YOU RECHARGE THE BATTERY, WAIT 10-15 MINUTES TO LET THE BATTERY COOL DOWN. STEP 3 START UP BALANCE MODE 1. Turn on the FLIGHT RIDER™ 2. Turn on the controller by 3. FLIGHT RIDER™ headlights will 4. You are now ready to play. by sliding the power switch to the pressing the POWER BUTTON.
  • Page 2 MADE IN CHINA TM & © Spin Master Ltd. All rights reserved. Retain this information, addresses and phone numbers for future reference. Children should be supervised during play. Keep away from obstacles and electrical hazards. Spin Master Ltd. reserves the right to discontinue the...
  • Page 3 (crystal, semiconductor, etc) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd or they could void the user’s authority to operate the equipment. Spin Master Inc., PMB #10053, 300 International Drive, Suite 100, Williamsville, NY 14221.