Adjusting The Bass; Adjusting The Treble; Adjusting The Balance - Clarion UDB275MP Owner's Manual

Basic Operations
Note:
Try to avoid pushing down the cover further after
flipping down.
2. Close the cover properly when not in use.
Note:
If you accidently push down the cover further after
flipping down, you can close the cover back and
push 2 sides of the cover to return to normal condi-
tion.
12
UDB275MP
Audio mode adjustments
1. Press the [ A-M ] button to select the Adjustment
mode. The mode switches as follows each time
the [ A-M ] button is pressed:
BASS TREB BAL
display.
2. Turning the [ ROTARY ] knob to adjust the
selected Audio mode.
BASS ( Bass ) : Adjustment range : - 7 to + 7
TREB ( Treble ) : Adjustment range : - 7 to + 7
BAL ( Balance ) : Adjustment range : L12 to R12
FAD ( Fader ) : Adjustment range : F12 to R12
∗ The display returns to the previous mode 7
seconds after the adjustment.
Note:
Bass and Treble can only be adjusted when the
"Z-Enhancer" is off.
3. When the adjustment is complete, press the
[ A-M ] button several times until the Function
mode is reached.

Adjusting the bass

1-1 Press the [ A-M ] button and select "BASS
0".
2-1. Turning the [ ROTARY ] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is "BASS 0".

Adjusting the treble

1-1. Press the [ A-M ] button and select "TREB
0".
2-1. Turning the [ ROTARY ] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is "BASS 0".

Adjusting the balance

1. Press the [ A-M ] button and select "BAL 0".
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is "BAL 0".
FAD
previous