Adjusting The Bass; Adjusting The Tone; Adjusting The Treble - Clarion vxz646 Owner's Manual

Basic Operations
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the - direction.
●When "B-BOOST 0" selected, you can
adjust the bass in the range of -3 to 3.
●When "IMPACT 0" selected, you can adjust
the bass and treble in the range of -3 to 3.
●When "EXCITE 0" selected, you can adjust
the bass and treble in the range of -3 to 3.
∗ When Z-Enhancer Plus is selected, press
and hold the [Z+] button for 1 second or
longer to change to the "CUSTOM" mode.
Bass/treble characteristics become flat and
the indication "Z+ FLAT" is shown in the
display.

Adjusting the tone

Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button, the
item changes as following order:
●When "BASS BOOST" is set
"SW-VOL 0" ➜ "B-BOOST 0" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
●When "IMPACT" is set
"SW-VOL 0" ➜ "IMPACT 0" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
●When "EXCITE" is set
"SW-VOL 0" ➜ "EXCITE 0" ➜ "BAL 0" ➜
"FADER 0" ➜ Last function mode.
●When "CUSTOM" is set
"SW-VOL 0" ➜ "BASS" ➜ "TREBLE" ➜
"BAL 0" ➜ "FADER 0" ➜ Last function
mode.
●When "Z+ OFF" is set
"SW-VOL 0" ➜ "BAL 0" ➜ "FADER 0" ➜
Last function mode.
* If subwoofer is effective, "SW-VOL 0" can be
selected.
Adjusting the subwoofer
∗ The factory default setting is "SW-VOL 0"
∗ This function can be adjusted only when the
subwoofer output is set to "ON". For details on
"Setting the Subwoofer", refer to the section
"Operation Common to Each Mode" of each
owner's manual.
1. Press the [A-M] button and select "SW-VOL 0".
2. Turning the [ROTARY] knob clockwise or
counterclockwise to adjust the subwoofer
volume.
14
VXZ646
∗ The factory default setting is "SW-VOL
0".(Adjustment range: -6 to +6)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Adjusting the bass

(Gain, Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
∗ The factory default setting is "BÅ
0Î". (Adjustment range: -6 to +8)
3. Press the [a] or [d] button to select
Å Å FREQ 50Î". Å Å
"BÅ
Turning the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "BÅ
50Î". (Adjustment 50/80/120 Hz)
4. Press the [a] or [d] button to select "BÅ
1Î".
Turning the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is "BÅ
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Adjusting the treble

(Gain, Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREBLE".
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
∗ The factory default setting is "TÅ
0Î". (Adjustment range: -6 to +6)
3. Press the [a] or [d] button to select
Å Å FREQ 12kÎ". Å Å
"TÅ
Turning the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is "TÅ
12kÎ". (Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Å Å GAIN Å Å
Å Å FREQ Å Å
Å Å Q Å Å
Å Å Q 1Î". Å Å
Å Å GAIN Å Å
Å Å FREQ Å Å