Mounting The Microphone; Installation Example Using The Original Mounting Bracket; Connections - Alpine INE-W611D Installation Manual

Mounting the Microphone

For safe use, make sure of the following:
• Location is stable and firm.
• Driver's view and operations are not obstructed.
• Microphone is located where the driver's voice can be
easily picked up (for example, on the sun visor).
When you speak into the microphone, you should not have
to change your driving posture. This may cause a distraction,
taking your attention away from safely driving your vehicle.
Carefully consider direction and distance while mounting the
microphone. Confirm that the driver's voice can be easily
picked up at the selected location.
Microphone
Cable clamp
(Sold separately)
Installation example using the Original
Mounting Bracket
1
Mount the original mounting sleeve to the unit
using the supplied screws.
2
Connect all other leads of the unit according to
details described in the "Connections" (page 5).
3
Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking
them into movable parts, such as a seat rail, or by
locating them against sharp or pointed edges.
4
-EN
Note on using HDMI Connection Cables
When using HDMI connection cables, secure the cables
to the HDMI Terminals with the HDMI Fixation Bracket
(KCU-610HD).
*The HDMI bracket is not included.
1
Slide the HDMI Fixation Bracket into the grooves
(A).
2
Secure it with the screw (B).
HDMI Terminal
(A) (B)
HDMI Fixation Bracket
Sold Separtely
(KCU-610HD)