Alpine HALO9 Installation Manual page 8

2
Fix the Display unit to the slider of the main unit using 4
screws (M4x6).
T
Screw (M4x6) (included)
~
3
Mount the POWER PLATE using a screw (M3x4).
POWER PLATE (included)
Screw (M3x4) (included)
✓
I
• If
you do not attach the POWER PLATE, the display will not turn on.
Make sure to attach the POWER PLATE.
6-EN
4
Adjust the mounting position of the display.
• The available adjustment positions of the Display differ depending on
the front-back/up-down/angle positions. Consult "Position Adjustment
and Mounting Dimensions of the Display" (page 15) for details.
1) Hold the Display up vertically, remove the 4 flush head
screws (M4x13) on the left and right sides for up-down
adjustment, and adjust the up-down position of the display.
Flush head screw (M4x13)
(left and right)