Introduction; Connections; Electrical Connections; Dmx Connections - Ignition LED PAR 56 Floor WCA 36x1W Manual

3. Introduction

Thank you for buying the LED PAR 56 Floor WCA 36x1W
For a successful installation and operation, please

4. Connections

4.1. Electrical connections

Electrical connections
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
mains with the enclosed power cable and plug. The earth has to be connected. mains with the enclosed power cable and plug. The earth
Cable (EU)
Brown
Light blue
Yellow/Green

4.2. DMX connections

To make a DMX512 connection go ahead like it is described in the picture. Make sure that you To make a DMX512 connection go ahead like it is described in the picture. Make sure that you To make a DMX512 connection go ahead like it is described in the picture. Make sure that you
use shielded cable. 3pole or 5pole XLR cables are suitable. use shielded cable. 3pole or 5pole XLR cables are suitable.
If you use a controller with a 5 pin DMX output connector, you will need to use a 5pin to 3 pin If you use a controller with a 5 pin DMX output conne
adapter.
4.3. DMX connection with terminator DMX connection with terminator
Where the DMX cable has to run cable has to run a long distance or the equipment is operated in an electrically
environment like a disco for installations
corruption of the digital control signal by electrical
connector with a 120 Ω resistor between pins 2
socket of the last device in the series.
PAR 56 Floor WCA 36x1W.
and operation, please read this manual carefully.
Cable (US) Cable (US)
Black
White
Green
for installations, we recommend using a DMX terminator.
signal by electrical noise. The DMX terminator is simply an
between pins 2 and 3, which is then plugged into the
in the series. Please look to the bottom drawings.
It is a powerful device powerful device.
Pin
Live
Neutral
Earth
terminator. This prevents
7 / 12
International International
L
N
use a 5pin to 3 pin
in an electrically noisy
is simply an XLR
the XLR output