Safety Instructions; For Safe And Efficient Operation For Safe And Efficient Operation - Ignition LED PAR 56 Floor WCA 36x1W Manual

Table of Contents

Advertisement

1. Safety instructions

1.1. For safe and efficient operation
For safe and efficient operation
Be careful with heat and extreme temperature
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Not put it in a temperature bellow 32
Keep away from humidity, water and dust
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
with water should not be placed on the set.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
Use a clean dry cloth to wipe off the dust, or a wet soft
If out of work, contact sales agency immediately
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not
open the cabinet by yourself, it might result a danger of electric shock.
open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
re with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
using the device for an extended period of time, be sure to disconnect the plug from the receptacle.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
by the disregard of this user manual are not subject to warranty. The dealer
by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems. Make sure the electrical
will not accept liability for any resulting defects or problems. Make sure the electrical
will not accept liability for any resulting defects or problems. Make sure the electrical
connection is carried out by qualified personnel. All electrical and mechanical connecti
connection is carried out by qualified personnel. All electrical and mechanical connecti
connection is carried out by qualified personnel. All electrical and mechanical connections
have to be carried out according to the European safety standards.
have to be carried out according to the European safety standards.
This device is suitable for indoor use (not outdoors) only.
device is suitable for indoor use (not outdoors) only.
All modifications to the device will void the warranty.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
Repairs are to carry out by skilled personnel only.
Use only fuses of the same type and original parts as spare parts.
Use only fuses of the same type and original
Protect the unit from rain and humidity to avoid fire and electric shocks.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
Make sure to unplug the power supply before opening the housing.
Make sure to unplug the power supply before opening the housing.
stable location
parts as spare parts.
3 / 12

Advertisement

Table of Contents
loading

Table of Contents