Installation; Certification; Hussmann Product Control; Shipping Damage - Hussmann GSVM4060F Installation & Operation Manual

Low temperature self contained vertical merchandiser with doors
Table of Contents

Advertisement

P/N 3003960_A

CERTIFICATION

These merchandisers are manufactured to
meet ANSI / National Sanitation Foundation
(NSF
) Standard #7 requirements. Proper
®
installation must be performed to maintain
these requirements. Near the serial plate, each
case carries a label identifying the type of
application for which the case was tested.
ANSI/NSF-7 Type I - Display Refrigerator / Freezer
Intended for 75°F / 55% RH Ambient Application
ANSI/NSF-7 Type II - Display Refrigerator / Freezer
Intended for 80°F / 55% RH Ambient Application
ANSI/NSF-7 - Display Refrigerator
Intended for Bulk Produce

HUSSMANN PRODUCT CONTROL

The serial number and shipping date of all
equipment is recorded in Hussmann's files
for warranty and replacement part purposes.
All correspondence pertaining to warranty or
parts ordering must include the serial number
of each piece of equipment involved. This is to
ensure the customer is provided with the cor-
rect parts.

SHIPPING DAMAGE

All equipment should be thoroughly examined
for shipping damage before and during
unloading. This equipment has been carefully
inspected at our factory. Any claim for loss
or damage must be made to the carrier. The
carrier will provide any necessary inspection
reports and/or claim forms.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

INSTALLATION

Apparent Loss or Damage
If there is an obvious loss or damage, it must
be noted on the freight bill or express receipt
and signed by the carrier's agent; otherwise,
carrier may refuse claim.
Concealed Loss or Damage
When loss or damage is not apparent until
after equipment is uncrated, retain all packing
materials and submit a written response to the
carrier for inspection within 15 days.

LOCATION

These merchandisers are designed for
displaying products in air conditioned stores
where temperature is maintained at or below
the ANSI / NSF-7 specified level and relative
humidity is maintained at or below 55%.
Placing refrigerated merchandisers in direct
sunlight, near hot tables or near other heat
sources could impair their efficiency. Like
other merchandisers, these merchandisers are
sensitive to air disturbances. Air currents
passing around merchandisers will seriously
impair their operation. Do NOT allow air
conditioning, electric fans, open doors or
windows, etc. to create air currents around the
merchandiser.
Recommended operating ambient temperature is
between 75°F(23.9°C) to 80° (26.7°C). Maximum
relative humidity is 55%.
GSVM 4060F Merchandisers
1-1

Advertisement

Table of Contents
loading

Table of Contents