Roland V-Synth GT Service Notes page 35

May, 2007
fig.23-4-lcd.eps_90
Red (full-screen)
fig.23-5-lcd.eps_90
Green (full-screen)
fig.23-6-lcd.eps_90
Blue (full-screen)
fig.23-7-lcd.eps_90
White (full-screen)
38
fig.23-8-lcd.eps_90
Black (full-screen)
When verification of all patterns has finished, a display like the one shown
below appears on the LCD screen.
fig.23-9-lcd.eps_90
If no problem has been encountered, press [PATCH PALETTE 8] or [
advance to the next test item.
24. ENCODER
This performs verification of the encoder.
A screen like the one shown below is displayed on the LCD.
fig.24-encoder.eps_90
Verify that turning the ARPEGGIO TEMPO knob counterclockwise two turns
displays a value of 0 and sounds a beep.
Verify that turning the ARPEGGIO TEMPO knob clockwise two turns displays
a value of 48 and sounds a beep.
Verify that turning the VALUE dial counterclockwise two turns displays a
value of 0 and sounds a beep.
Verify that turning the VALUE dial clockwise two turns displays a value of 48
and sounds a beep.
If no problem occurs with either ARPEGGIO TEMPO or VALUE, execution
automatically advances to the next test item.
V-SYNTH/GT
] to