Introduction - Universal Remote Control MRF-300/RFX150 Installation Manual

Introduction

The MRF-300 base station is an "addressable" base station. It is only compati-
ble with Universal Remote Control's line of Custom Programmed Remotes
with RF Addressing such as
the MX-800, MX-650 Omega and the MX-350 Osiris.
ability to control as many as 90 identical components throughout a house.
1. URC "Addressable" remote
controls send radio waves in
every direction, so you don't have
to point the remote anymore!
3.The MRF-300's built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-300.
MRF-300 B
ASE
the MX-3000, the MX-950 Aurora, the MX-850 Aeros,
2.The RFX-150 RF Sensor can be freely
positioned out of way of the interference
the A/V components create, connecting to
the MRF-300 via a 10' cable (which can be
extended).
4. Self-adhesive "Flashers" affix to the
Infrared sensors on the front panels of your
components. The Flashers relay commands
to components out of sight of the MRF-
300's Front Blaster. The flashers plug in to
the MRF-300's rear flasher line outputs via
their 10 foot cables. Uniquely, the MRF-300
can also connect to rear panel IR Inputs via
its adjustable IR Line Outputs.
Page 1
S
TATION
RF Addressing gives you the