Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext.
Page 3
Temperature Range Resolution Accuracy F to 122 F (0 C to 50 ±1.5 F (±0.8 Relative Humidity Range Resolution Accuracy 10 to 70% RH 0.1% ±3% RH 70 to 95% RH 0.1% ±4% RH Model 407412 Version 2.1 July 2006...
FUNCTION Select Humidity (left position) or Air Velocity (right position) UNIT Select the unit of measure for Air Velocity Battery compartment and tilt sand are located on the back of the meter Rubber protective jacket Vane Anemometer sensor Humidity sensor Model 407412 Version 2.1 July 2006...
Page 5
Press RECORD again to return the meter to normal operation. All stored data will be cleared and the REC/MIN/MAX icons will disappear from the LCD. Note that putting the meter into the Record mode defeats the Auto Power Off feature. Model 407412 Version 2.1 July 2006...
6. Place the probe in a 75% RH environment for a minimum of 30 minutes and adjust “R6 for a reading of 75.0% RH. 7. Verify that the temperature reading is within the published specifications. If not, perform calibration steps 2 and 3, above, again. Model 407412 Version 2.1 July 2006...
Need help?
Do you have a question about the 407412 and is the answer not in the manual?
Questions and answers