Table of Contents
Advertisement
Generic Pioneer Charter OCAP.fm Page 20 Friday, July 20, 2007 1:28 PM
USING KEYMOVER
The C4000 and S4000 Remote Controls include a
Keymover feature that allows you to map (or copy) keys
from one mode (i.e., source mode) to another mode
(i.e., destination mode).
Programming Keymover
For example, if your DVD player does not have volume
control, you can map those keys (i.e., VOL+, VOL-, and
MUTE) from the TV mode to DVD mode as follows:
1.
On the remote control, press CBL (or STB)
once; it blinks once. Then press and hold SET
UP until the CBL (or STB) key blinks twice.
2.
Enter 9 9 4. The CBL (or STB) key blinks
twice.
3.
For the source mode, press a desired device
key once (i.e., AUX, TV, DVD, CBL or STB). For
this example, press TV once.
4.
For the source key, press a key to be moved
once. For this example press VOL- once.
5.
For the destination mode, press a desired
device key once (i.e., AUX, TV, DVD, or CBL or
STB). For this example, press DVD once.
6.
For the destination key, press a key to be
moved once. For this example press VOL+
once.
7.
Repeat steps 1 to 6 to move additional keys.
For this example, repeat steps 1 to 6 two more
times to map the remaining volume control
keys, substituting VOL- and MUTE as source
and destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now
use your C4000 and S4000 Remote Controls to control
the TV's volume and mute in the DVD mode, as well as
in the TV mode.
www.urcsupport.com
20
Hide quick links:
Advertisement
Table of Contents
