Save / Load Data Program; Information Displayed During The Process - RC-Plus PLUS POWER 60 Instruction Manual

9. BATTERY INTERNAL RESISTANCE TESTING PROGRAM

10. SAVE / LOAD DATA PROGRAM

11. INFORMATION DISPLAYED DURING THE PROCESS

You can access various information on the LCD display during the loading or unloading
process. When you press the DEC button, the charger displays the user settings. You can
also monitor the voltage of each cell by pressing the INC button.
Press "ENTER" to access.
Display the Internal Battery Resistance data.
Press "INC" to check the total Internal Resistance data of the
battery (press "INC" again to display the IR data of the cell).
After connecting and programming your battery, press BATT
TYPE/STOP to select "PROGRAM MEMORY" according to your
battery (LIPO, LIFE, NICD...).
Press" INC (+) OR DEC (-)" to select a MEMO number.
Press" ENTER" to automatically store the charge/discharge data
of your battery.
You can store 5 batteries per battery type. [0]-[4].
When the program is finished, the final voltage is displayed.
Here, the display shows that the AUTO CUT-OFF function is
active and indicates the capacity setting value.
Here, the display shows that the AUTO TIMER function and the
number of minutes setting is active.
17