Faults
Loud noises, vibrations
and appliance "move-
ment" during the spin
cycle.
The display panel indica-
tor lights do not work
while the appliance is run-
ning.
There is detergent resi-
due on the laundry.
If you cannot rectify a fault yourself (after turning the programme selector to Û (Off) and switch on again) or
a repair is required:
Turn the programme selector to Û (Off). Pull out the mains plug.
■
Turn off the tap and call customer services.
■
Cause/Remedy
Is the appliance aligned? ~ "Alignment" on page 18
■
Are the appliance's feet fixed? Secure the appliance's feet.
■
Have the transport locks been removed? ~ "Removing the transport
■
locks" on page 13
Has there been a power failure?
■
Have the fuses blown? Reset/replace the fuses.
■
If the fault occurs repeatedly, call customer services.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select q Rinse or brush the laundry after washing.
■
Faults and what to do about them
en
45