Additional Programme; Settings; Ã Stain; Prewash - Siemens WH34A2X0HK Instruction Manual And Installation Instructions

\

Additional programme

settings

You can find possible additional
N ote:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
ã Stain
Types of stain that can be selected:
Oil
Ì
Red Wine
â
Cosmetic
î
Orange
ó
Do not let stains dry. Remove solid
substances beforehand.
Select a programme with a stain type:
Arrange items of washing as usual.
1.
Select a programme.
2.
Select a stain type (depending on
3.
the selected programme).
Start the programme.
4.
The appliance adjusts the average
washing temperature, drum movement
and soaking time to the specific type of
stain. Hot or cold water, gentle or
intensive washing and long or short
soaking ensure that the wash
programme sequence is specially
adapted to each type of stain. This
makes sure that stains are treated in the
best possible way.
Additional programme settings
s Prewash
Prewash for heavily soiled laundry.
Touch s Prewash to activate or
deactivate it.
Put the detergent into dispenser I
Note:
and II.
l Rinse Plus
Settings that can be selected:
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration, due to
additional rinse cycle.
The number of rinse cycles that the
programme actually runs depends on
the number that is set as a basic setting
for the programme.
z Water Plus
Increased water level for gentler
treatment of the laundry.
Touch z Water Plus to activate or
deactivate it.
( varioSpeed
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch ( varioSpeed to activate or
deactivate it.
With the ( varioSpeed
Note:
additional programme setting activated,
the maximum load of washing will be
reduced.
en
31