Advertisement
Quick Links
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) LCD screen • D) LCD back plate • E) (10) Phillips screws • Axxess interface (not shown)
A
B
Motorcycle Accessories
Harley-Davidson Electra Glide FTHTP
(Police Edition)
2014-Up
Visit
MetraPowerSports.com
for more detailed information about the product and up-to-date
vehicle specific applications
KIT FEATURES
• ISO DIN radio provision
• Axxess interface in water resistant enclosure included
• AXSWC in water resistant enclosure included for installations adding OEM
handlebar audio controls
• Antenna included
C
D
E
MetraPowerSports.com
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Fairing Disassembly............................................2-3
Kit Assembly ..........................................................4
Axxess Interface Installation .............................5-11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface and harness included
Antenna: Included
Steering wheel control interface: Included
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers • Allen wrenches
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
BC-SDPPAK
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 3/31/20 INSTBC-SDPPAK
Advertisement
Related Manuals for Metra Electronics Saddle Tramp BC-SDPPAK
Summary of Contents for Metra Electronics Saddle Tramp BC-SDPPAK
- Page 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Motorcycle Accessories MetraPowerSports.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 3/31/20 INSTBC-SDPPAK...
- Page 2 FAIRING DISASSEMBLY 1. Remove (4) T-27 Torx screws from the inner fairing. (Figure A) 2. Remove (3)T-27 Torx screws securing the windshield (caution not to drop the outer fairing or windshield). (Figure B) 3. Remove the outer fairing, unplugging the headlight. (Figure C) 4.
- Page 3 FAIRING DISASSEMBLY (CONT) 5. Remove (11) screws securing the radio “dummy” bracket: (Figure E) a. (2) T-27 Torx screws shared with the gauge cluster and a third T-27 Torx screw to remove the gauge cluster in step 7. b. (4) 5/32” Allen screws facing outward. c.
- Page 4 KIT ASSEMBLY 1. Secure the radio brackets to the radio housing with (4) Phillips screws supplied. (Figure A) 2. Remove the metal “DIN” sleeve and trim ring from the aftermarket radio. 3. Slide the radio into the radio housing assembly and secure with screws supplied with the radio.
-
Page 5: Table Of Contents
AXXESS INTERFACE INSTALLATION INTERFACE FEATURES TABLE OF CONTENTS • Includes a T-harness for tapping into the CAN data system Pre-wiring Instructions ..........................6 • Includes a harness with OEM connectors for adding front & rear OEM speakers Wiring Instructions ...........................6 • Provides accessory power (10-amp) Installation ..............................7 •... -
Page 6: Pre-Wiring Instructions
PRE-WIRING INSTRUCTIONS WIRING INSTRUCTIONS (CONT) BC-SDPPAK interface water resistant enclosure installation • Gray wire to the right front positive speaker output. • Push the harness into the cap. • Gray/Black wire to the right front negative speaker output. • Connect the harness to the circuit board, then clip it onto the circuit board enclosure. •... -
Page 7: Installation
INSTALLATION PROGRAMMING (CONT) With the key in the off position: For installations when OEM handlebar audio controls have been installed: 4. Install the AXSWC and enclosure as per Pre-Wiring Instructions: 1. Connect the BC-SDPPAK harness to the BC-9700P wire harness previously installed. a. -
Page 8: Lcd Operation
LCD OPERATION HANDLEBAR CONTROL SETTINGS * The included LCD screen provides oil pressure and EITMS status. For more information, please L.E.D. Feedback see the owner’s manual that came with the bike. The (23) Red L.E.D. flashes represent which brand radio the ASWC-1 is connected to. Each Main menu options: flash represents a different radio manufacturer. - Page 9 HANDLEBAR CONTROL SETTINGS (CONT) Radio Legend Attention: The Axxess Updater App can also be used to program the following (3) sub-sections as well, pending that the interface has been initialized and programmed. 1 - Eclipse (Type 1) 7 - Alpine 13 - LG 19 - Insance Audio 2 - Kenwood 8 - Visteon 14 - Parrot 20 - Magnadyne Radio Type 3 - Clarion (Type 1) 9 - Valor 15 - XITE 21 - Boss (Type 3)
- Page 10 HANDLEBAR CONTROL SETTINGS (CONT) Button Assignment Legend Dual Assignment (long button press) 1 - Not allowed 10 - Band The ASWC-1 has the capability to assign two functions to a single button, except Volume-Up and Volume-Down. Follow the steps below to program the button(s) to your liking. 2 - Not allowed 11 - Play/Enter Note: Seek-Up and Seek-Down come programmed as Preset-Up and Preset-Down for a...
-
Page 11: Updating
HANDLEBAR CONTROL SETTINGS UPDATING (CONT) Dual assignment legend • Download and install the Axxess Updater from axxessinterfaces.com. • Connect the USB-MINI-CAB update cable (sold separately) between the Axxess interface and the 1 - Not allowed 10 - Band computer. 2 - Not allowed 11 - Play/Enter 3 - Seek-Up/Next 12 - PTT... - Page 12 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Motorcycle Accessories MetraPowerSports.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 3/31/20 INSTBC-SDPPAK...
Need help?
Do you have a question about the Saddle Tramp BC-SDPPAK and is the answer not in the manual?
Questions and answers