Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 82-9600
Harley-Davidson 1998-2013
KIT FEATURES
• Mounts aftermarket 6" to 6.5" speakers into
factory speaker locations.
KIT COMPONENTS
• A) (2) speaker adapters • B) (6) #8 x 1" Pan-head Phillips screws
A
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench (T-25, T-27, 6mm or 3/16 hex)
APPLICATIONS
(FL models with fairings)
82-9600
B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Advertisement
Table of Contents
Related Manuals for Metra Electronics 82-9600
Summary of Contents for Metra Electronics 82-9600
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 82-9600 APPLICATIONS Harley-Davidson 1998-2013 (FL models with fairings) 82-9600 KIT FEATURES • Mounts aftermarket 6” to 6.5” speakers into factory speaker locations. KIT COMPONENTS • A) (2) speaker adapters • B) (6) #8 x 1” Pan-head Phillips screws...
- Page 2 82-9600 Fairing Disassembly FLH/Batwing models: 1. Cover the front fender. 2. Remove (2) T-27 Torx bolts from inner fairing (under mirrors) (Figure A, step 2) Step 4 3. Remove (2) T-27 Torx bolts from outer edges of inner fairing near the fork tubes (facing forward) (Figure A, step 3) 4.
- Page 3 82-9600 Fairing Disassembly FLH/Batwing models: (cont.) 6. Lift away and unplug headlight to remove outer fairing. (Figure B) 7. Unbolt and remove inner fairing support brackets from each side (3/16” Allen & T-25 Torx screws). Note the Torx screw is also a shared speaker screw.
- Page 4 82-9600 Fairing Disassembly Roadglide/Sharknose models 1. Loosen (6) T-25 Torx bolts from Step 1 Step 1 bottom, middle and top of left and right sides of the inner fairing. (Figure A) (Figure A)
- Page 5 82-9600 Fairing Disassembly Roadglide/Sharknose models (cont.) 2. Use a 1/2” socket or box wrench to remove the (2) acorn nuts that hold each turn signal at the lower fairing. Let the signals hang loose. (Figure B) 3. Lift away the fairing, unplug the headlights and remove.
- Page 6 82-9600 Kit Assembly 1. Using 3 of the screws in the provided hardware, mount the speaker adapter to the inner fairing. The 4th inner bottom screw locations are not used on FLH/ batwing models. For Road Glide models, rotate the adapter until...
Need help?
Do you have a question about the 82-9600 and is the answer not in the manual?
Questions and answers