Before First Use: Cleaning The Grain Mill Attachment - KitchenAid 5KGM User Manual

USING THE STAND MIXER ATTACHMENT

BEFORE FIRST USE: CLEANING THE GRAIN MILL ATTACHMENT

IMPORTANT: The grinding burrs of the Grain Mill Attachment have been lightly coated
with mineral oil to help avoid rusting during storage. Before using the Grain Mill
Attachment, wash off the oil with a mild detergent solution and allow to dry thoroughly.
If you do not remove the oil, the burrs will become clogged and the grinding action will
slow down. After using the Grain Mill Attachment, follow the directions in the "Care
and cleaning" section.
Hand-turn the screws to release
the front plate with adjustment knob
1
from the main body of the Grain Mill
Attachment.
Wash all parts by hand with mild
detergent and warm water. Dry the
3
main body thoroughly with a towel.
Allow the parts to air dry.
IMPORTANT: Do not wash the Grain
Mill Attachment or any of its parts in an
automatic dishwasher.
10 | USING THE STAND MIXER ATTACHMENT
Remove the power shaft from
2
the main body of the Grain Mill
Attachment.
To reassemble: Insert the power shaft
into the main body of the Grain Mill
4
Attachment. Then, mount the front
plate onto the front of the shaft and
hand-turn the screws into place.