Replacement Of The Smartsupply - Vetter SmartFork SmartSupply SF-SUPPLY-V10-00X Operating Instructions Manual

4.2

Replacement of the SmartSupply

Personnel:
Protective equipment:
Disassembly, 1. Remove the battery from the SmartSupply (Fig. 7).
SmartSupply
variant BAT
Fig. 8: Screw connection of the SmartSupply
2. Loosen and remove the three countersunk screws on the outside of the connection
panel (Fig. 8)
n Service specialist
n Industrial safety helmet
Protective clothing
n
n Protective gloves
n Safety shoes
New pairing necessary after replacement!
The SmartSupply needs to be "paired" with the broker following replace-
Ä Chapter 3.2 "Pairing " on page 18.
ment of a client
The SmartSupply needs to be "paired" with the client and the SmartDis-
play if a broker is replaced
®
SmartFork
Ä Further information on page 18.
SmartSupply
Maintenance
Replacement of the SmartSupply
21
EN