Table of Contents
Advertisement
Maintenance
Daily visual inspection by the driver
4
EN
4.1
20
Maintenance
NOTICE!
Maintenance intervals
Always include an inspection of the SmartSupply as part of maintenance
procedures for the SmartFork
Daily visual inspection by the driver
Personnel:
n
Protective equipment:
n
n
n
n
1.
Check the SmartSupply at the fork head for tight fit.
2.
Check that the cable connection to the sensor system is secure.
3.
Check the surfaces of the battery for breakage and dirt.
4.
Check that the battery is fully charged
Replacing the battery at the end of the shift
In order to ensure speedy and problem-free use of the SmartSupply,
always make sure that there are fully charged batteries available for sub-
sequent use.
Insert the battery into the charging station right at the end of the shift.
SmartFork
®
Scale.
Driver of industrial trucks
Protective clothing
Industrial safety helmet
Protective gloves
Safety shoes
Ä Further information on page 17.
®
SmartSupply
Advertisement
Table of Contents
