Jumpers; Clear Cmos Jumper: Jbat1 - MSI MS-7236 Manual

MS-7236 ATX Mainboard
The motherboard provides the following jumpers for you to set the computer's
function. This section will explain how to change your motherboard's function through
the use of jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external battery
to keep the system configuration data. With the CMOS RAM, the system can automati-
cally boot OS every time it is turned on. If you want to clear the system configuration,
use the JBAT1 (Clear CMOS) Jumper to clear data. Follow the instructions below to
clear the data:
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off.
Then return to 1-2 pin position. Avoid clearing the CMOS while the
system is on; it will damage the mainboard.
2-20

Jumpers

1
JBAT1
1
1
3
3
Keep Data Clear Data