Table of Contents
Advertisement
www.ffv.com
QUICK START GUIDE (continued)
If you'd like to skip this section and prefer watching "How to Videos" see FFV's YouTube channel:
go to our
Facebook
page:
REPLAY in action. The Hyperlinks for the YouTube channel & Facebook page are on page 31 of this manual.
A. Install Drive – Slide the chromed latch to the right to open the drive bay door. (#5, Figure 1, page 4). Use an
approved or FFV supplied 2.5"/ 9.5mm SATA solid-state drive (SSD) and insert it into the drive bay (#5, Fig.
1). Close the door and the SSD will be pushed into its connection socket.
B. Apply Power – Plug the power cable into a wall socket and connect to the AC IN located on the back of the
unit (#11, Figure 2, page 5). Turn "ON" the unit by holding the power button located on the top left of the
front panel for one second (#1, Fig. 1).
C. Connect a video and audio source – Connect an SD or HD-SDI video signal to the "IN" BNC input (#5, Fig. 2)
and if needed, an analog audio signal to the input XLR3's (#1, Fig. 2).
D. Select Menu - Press the menu button (#12, Fig. 1) to enter the Settings menu which allows you to set a
myriad of features and commands. Use the scroll wheel (#14, Fig. 1) to move through the menu options and
press the selection/enter button to change a setting (#13, Fig. 1). See SETTINGS MENU for additional details.
E. Cancel/Escape - At any time press the cancel button (#11, Fig. 1) to exit the current choice or settings
menu and get back to video display of IN & OUT signals.
V 1.0 July 2015 MP
FFVDVRS
where we constantly post new videos and pictures of the STUDIO PRO
Preliminary Version subject to change without prior notice
FFVvideos
or
6
Advertisement
Table of Contents
