Table of Contents
Advertisement
www.ffv.com
INSTALLING THE DRIVE
J.
Open drive bay door by sliding to the right the chromed latch button (#5 in Figure 3 above).
K. Place the drive with the SATA connector towards the entrance of the drive bay door located on the top
right of the front panel (# 5, Fig. 3).
L. Use an approved or FFV supplied 2.5"/ 9.5mm SATA solid-state drive (SSD) and insert it into the drive bay.
Close the drive bay door and the SSD will be pushed into its socket. (#5, Fig. 3)
M. Turn "ON" the unit by holding down the power button for one second (#1, Fig. 3)
N. Allow some time for the unit to identify the drive and its content. When the drive is ready the drive space
icon on the LCD display will turn white.
V 1.0 July 2015 MP
Figure 3
Preliminary Version subject to change without prior notice
9
Advertisement
Table of Contents
