www.ffv.com
REAR PANEL CONNECTIONS
Numbers below refer to the
1. Audio IN: records two line level analog audio signals – XLR3 stereo jack connector
2. Audio PLAY OUT: outputs two line level analog audio – XLR3 stereo jack connector
3. Time Code IN: Timecode input to Record side (IN)- BNC connector
4. Time Code LOOP OUT: Timecode loop output of Record side (IN)- BNC connector
5. SDI VIDEO IN: SD/HD-SDI Video input w/ 8 tracks of embedded audio. "IN" video on LCD display - BNC connector
6. SDI VIDEO LOOP OUT: Active monitoring-grade video (2 pixel propagation delay) & embedded audio loop allows
for connection of input signal to other devices - BNC connector
7. Time Code PLAY OUT: Timecode output of Replay side (OUT) - BNC connector
8. REF IN: External video Reference, analog 525/625 composite black burst - BNC connector
9. SDI VIDEO PLAY OUT: SDI Video output w/ 8 tracks of embedded audio. Time-shifted signal, "OUT" on LCD
display for monitor or other external device - BNC connector
10. RS-422: Serial Control connection, BWV-75 Protocol - DE-9 connector
11. 100-240VAC: Power Cord EIA socket AC connection.
V 1.0 July 2015 MP
red
numbers on the rear panel picture from the previous page (10).
Preliminary Version subject to change without prior notice
11