Table of Contents
Advertisement
www.ffv.com
LOOP RECORD
-
ON – this will "loop-record" content on the entire drive during the RECORD mode or within the available
space if any clips already exist on the drive. When the end of the free space is reached; the oldest frame will
be replaced by the newest frame.
-
OFF - the unit will stop recording when the full storage capacity of the drive is reached.
A. Press the Menu button – this will place you in the settings Menu (#13, Figure 4 page 14).
B. Highlight the Loop RECORD Option using the scroll wheel (#19, Fig. 4)
C. Press the selection button and On/Off will be displayed (#14, Fig. 4).
D. Highlight the needed command using the scroll wheel (#19, Fig. 4).
E. Press the selection button to select the loop record mode (#14, Fig. 4).
Note: When "Loop-Record" is enabled, make sure the "Loop-playback" mode is turned "off" as it may create confusing behavior.
V 1.0 July 2015 MP
Preliminary Version subject to change without prior notice
18
Advertisement
Table of Contents
