Answer Delay; Remote Access; Switch Remote Access On/Off - BT Xenon 1500 User Manual

Answer delay

Answer delay sets the number of times your BT Xenon 1500 will
ring before the answering machine picks up your call. The default
setting is 6 rings. You can change this setting from between 2-9
rings or to time saver mode.
1. Press the Menu button, the display shows
2. Press or
to select.
3. Press or
4. Press or
(2-9)or
TIME SAVER
5. Press and hold

Remote access

Ensure that you have Remote Access turned on and that you
have set a Remote Access PIN first if you want to use this feature.
When switched on, you can call in from another phone to listen
to your messages and operate your answering machine. You are
asked to enter your system PIN so that other people cannot ring
up and listen to your messages. To change your System PIN, see
page 38.

Switch remote access on/off

1. Press the Menu button, the display shows
2. Press or
to select.
3. Press or
4. Press or
press .
5. Press and hold
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
until
ANS SETTINGS
to display
ANSWER DELAY
to select the number of rings you want
and press .
to return to standby.
until
ANS SETTINGS
to display
REMOTE ACC
to choose either
ON
to return to standby.
, press
ANS MACHINE
is displayed and press
and press .
, press
ANS MACHINE
is displayed and press
and press .
or and
OFF
.
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
Xenon 1500 answer machine to
answer calls.
.
37