Maintenance - Ryobi RY36C60A Original Instructions Manual

before recharging.

MAINTENANCE

■ When not using or when cleaning the
product, disconnect it from the power
supply and remove the battery pack.
■ Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents. Use clean cloth
or soft brush to remove dirt and dust.
■ Do not, at any time, let brake fluids,
gasoline, petroleum-based products,
and penetrating oils come in contact
with plastic parts. These products
contain chemicals that can damage,
weaken, or destroy plastic.
WARNING
Hazardous voltages are present within
the product; do not disassemble.
■ If the supply cord is damaged,
it must be replaced by the
manufacturer,
agent or similarly qualified
persons in order to avoid a
hazard.
CLEANING THE CHARGER
WARNING
Unplug the charger power cord from
power supply before cleaning at any
time to prevent serious personal
injury.
■ Clean the charger surface (except
labels) using a damp cloth with a mild
detergent.
■ Do not use any strong detergents
on the plastic housing. They can be
4 | English
■
STORAGE
Store your charger in a cool dry place
between 10°C. and 38°C.
KNOW YOUR PRODUCT
See Fig. 1
1. Battery port
2. LED indicator
3. Power cord
4. Key hole hanger
SYMBOLS ON THE PRODUCT
Some of the following symbols may
be used on this product. Please study
them and learn their meaning. Proper
interpretation of these symbols will
allow you to operate the product better
and safer.
its service
damaged by certain aromatic oils
such as pine and lemon, and by
solvents such as kerosene.
Moisture can cause a shock hazard.
Wipe off any moisture with a soft dry
cloth.
Precautions that involve
your safety.
To reduce the risk of
injury, user must read and
understand user's manual
before using this product.
Class II: Protection
against electric shock rely
on double insulation or
reinforced insulation.
T 10A
Time-lag type fuse
Indoor use only