Install The Terminal Block - National Instruments SCXI-1332 Installation Instructions Manual

6. Install the Terminal Block

1 SCXI-1332 Thumbscrew
2 SCXI-1127/1128 Thumbscrews
NI SCXI-1332 Installation Instructions
To connect the SCXI-1332 to the SCXI-1127/1128 front connector,
complete the following steps:
1. Plug the SCXI-1332 onto the front connector on the SCXI-1127/1128.
2. Tighten the top and bottom thumbscrews on the terminal block rear
panel to hold it securely in place.
2
1
5
3 Front Connector
4 SCXI-1127/1128
Figure 5. Installing the SCXI-1332 Terminal Block
3
4
8
5 SCXI-1332
ni.com