Grounding Point - Dell W-AP270 Series Installation Manual

1. Power off the AP.
2. Press and hold the reset button using a small, narrow object, such as a paperclip.
3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds.
4. Release the reset button.
The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now
continue to boot with the factory default settings.
AC Power Interface
The W-AP270 Series access point is capable of AC power in the range of 100 - 240 VAC. The power cord or power
connector kit is sold separately.

Grounding Point

Always remember to protect the AP by installing grounding lines. The ground connection must be complete
before connecting power to the AP enclosure.
Figure 6 W-AP274 and W-AP275 Top View
Mounting Holder
Solar Shield
The solar shield with the mounting holder is fixed onto the W-AP270 Series access point before shipping from
the factory.
Figure 7 W-AP274 bottom View
Air Vent
6 Dell Networking W-AP270 Series Outdoor Access Point | Installation Guide