Dell W-AP270 Series Installation Manual page 4

LED
The W-AP270 Series access point is equipped with one LED that indicates the system status of the access point.
Table 1 W-AP270 Series LED Status during Boot Up
LED
System LED
Table 2 W-AP270 Series LED Status during Operation
LED
System LED
Figure 3 W-AP274 Rear View
4
Color/State
Off
Red
Green - Flashing
Green - Steady
Green - Yellow, 6 seconds
period
Color/State
Solid Red
One blink off every 3 seconds
Two quick blink off 0.5 seconds
apart cycled every 3 second
Meaning
No power to AP
Initial power-up
AP booting
AP ready and 1000Mbps Ethernet link established. The
LED turns off after 1200 seconds
AP ready and 10/100Mbps Ethernet link established. The
LED turns off after 1200 seconds
Meaning
General fault
Radio 0 fault (5 GHz)
Radio 1 fault (2.4GHz)
Dell Networking W-AP270 Series Outdoor Access Point | Installation Guide
Grounding Point
USB Console Port and Reset button
AC Power Interface
LAN Port
WAN Port