Grounding Point - Dell W-IAP270 Series Installation Manual

Reset Button
The reset button can be used to return the IAP to factory default settings. To reset the IAP:
1. Power off the IAP.
2. Press and hold the reset button using a small, narrow object, such as a paperclip.
3. Power-on the IAP without releasing the reset button. The system LED will flash within 5 seconds.
4. Release the reset button.
The system LED will flash again within 15 seconds indicating that the reset is completed. The IAP will now
continue to boot with the factory default settings.
AC Power Interface
The W-IAP270 Series Instant access point is capable of AC power in the range of 100 - 240 VAC. The power cord
or power connector kit is sold separately.

Grounding Point

Always remember to protect the IAP by installing grounding lines. The ground connection must be complete
before connecting power to the IAP enclosure.
Figure 6 W-IAP274 and W-IAP275 Top View
Mounting Holder
Solar Shield
The solar shield with the mounting holder is fixed onto the W-IAP270 Series Instant access point before shipping
from the factory.
6 Dell Networking W-IAP270 Series Outdoor Instant Access Point | Installation Guide