Step 10 Attach Dome To Emitter; Step 11 Secure Gas Line; Step 12 Connect Gas Line To Cylinder - Blue Rhino Endless Summer 153300 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 10 – Attach Dome to Emitter
• Gently lay heater on its side
Tip: Use styrofoam end to prop up top half of heater.
• Align holes in Dome with Emitter Studs.
• Secure Dome to Emitter using (3) Cap Nuts.
• Leave heater on its side for next step.
Step 11 – Secure Gas Line
• Line up hole in Gas Clip with threaded hole in Support Plate.
• Attach using (1) Extra Long Screw.
• Tighten screw in Gas Line Clip until Gas Line is held securely in place.
• Stand heater upright on base.
Step 12 – Connect Gas Line to Cylinder
The pressure regulator and hose assembly supplied with the appliance
must be used and replacements must be those specified by the
manufacturer.
• Slide full Propane Cylinder onto Heater Base.
• Attach Gas Line to Cylinder by turning black plastic knob clockwise
over Cylinder valve until tight.
Note: Be careful not to kink flexible hose of Gas Line.
Owner's manual and assembly instructions: model 153300 outdoor patio heater
Note:
The white ceramic cone in the top of
the engine is an important piece. DO
NOT REMOVE.
Caution:
Before you attempt to use a propane
cylinder, understand all cylinder and
propane related precautions in Section
#1 - "Safety First."
3/28/03 10