Step 10 Attach Dome To Emitter; Step 11 Secure Gas Line; Step 12 Connect Gas Line To Cylinder - Blue Rhino Endless Summer 163000 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 10 – Attach Dome to Emitter
Gently lay heater on its side
Tip: Use styrofoam end to prop up top half of heater.
Align holes in Dome with Emitter Studs.
Secure Dome to Emitter using (3) Cap Nuts.
Leave heater on its side for next step.
Step 11 – Secure Gas Line
Line up hole in Gas Clip with threaded hole in Support Plate.
Attach using (1) Extra Long Screw.
Tighten screw in Gas Line Clip until Gas Line is held securely in place.
Stand heater upright on base.
Step 12 – Connect Gas Line to Cylinder
The pressure regulator and hose assembly supplied with the appliance
must be used and replacements must be those specified by the
manufacturer.
Slide full Propane Cylinder onto Heater Base.
Attach Gas Line to Cylinder by turning black plastic knob clockwise over
Cylinder valve until tight.
Note: Be careful not to kink flexible hose of Gas Line.
Owner's manual: model 163000 outdoor patio heater 12/15/03
Caution:
Before you attempt to use a
propane cylinder, understand
all cylinder and propane
related precautions in Section
#1 - "Safety First."
®
10