Step 14 Install Cylinder Access Panel; Step 15 Replace Engine Access Panel - Blue Rhino Endless Summer 153300 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 14 – Install Cylinder Access Panel
• Line up holes on Latch with slots on Cylinder Shroud. Attach with (2)
Latch Screws and (2) Latch Nuts.
• Line up holes in Access Panel hinges with holes in recessed area of
left leg. Attach each hinge with (2) Hinge Screws and (2) Hinge Nuts.
• Swing Access Panel closed and slip Latch over panel hook and
snap shut.
Step 15 – Replace Engine Access Panel
• Slide Igniter wire onto Igniter post.
• Position Engine Access Panel back in place.
• Secure Panel in place with 3 screws previously removed from side
and bottom holes.
Note: Once you have successfully completed assembly steps 1-15 you
are ready to begin operating your heater.
If you wish to permanently mount your heater to a deck or patio, use the
5/8" hole in the base to attach it to an anchor bolt.
Owner's manual and assembly instructions: model 153300 outdoor patio heater 3/28/03 12