ProKlima SPLIT 850 C Operating Instructions Manual page 13

Anleitung SPLIT_850_C_GB:_
The following pages are intended for professional installers.
11. Important installation instructions
Selecting the place to install the indoor device
The air flow must never be blocked.
a
The cooled air should be capable of being
a
distributed to all parts of the room.
The maximum distance between the indoor and
a
outdoor device for standard versions is 4 m.
Mount on a solid wall to prevent vibrations.
a
Avoid direct sunlight.
a
Take into account a slight condensate run-off.
a
Selecting the place to install the outdoor device
The device must not be exposed to strong gusts of
a
wind.
Make sure that the device is well ventilated and
a
kept free of dust. Avoid direct exposure to rain and
sunlight.
Make sure that the operational noises and air
a
emissions do not cause a nuisance for neighbours.
Install on a firm base, avoiding excessive noise or
a
vibrations.
Avoid locations where combustible gas or leakage
a
can be emitted.
Fix the deviceʼs installation feet with care if the
a
device is to be installed well above them.
Important
Do not hesitate to contact our service partners.
They will be able to give you a speedy response to
all your questions so that your system can be
installed correctly.
10.11.2006 8:24 Uhr Seite 13
13