Call Mute And Un-Mute; Call Hold And Resume; Call Transfer; Call Forward - Yealink SIP-T48S Quick Start Manual

CALL MUTE AND UN-MUTE

• Press to mute the microphone during a call.
• Press again to un-mute the call.

CALL HOLD AND RESUME

To place a call on hold:
Hold
Press or tap the
To resume the call, do one of the following:
• If there is only one call on hold, press
• If there is more than one call on hold, tap the call you want to resume,
and then press

CALL TRANSFER

You can transfer a call in the following ways:
Blind Transfer
1. Press or tap the Transfer
2. Enter the number you want to transfer to.
Transfer
3. Press or tap the
Semi-Attended Transfer
1. Press or tap the Transfer
2. Enter the number you want to transfer to, and then press
3. Press or tap the Transfer
Attended Transfer
1. Press or tap the Transfer
2. Enter the number you want to transfer to, and then press
3. Press or tap the

CALL FORWARD

To enable call forward:
1. When the phone is idle, tap
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For
Time field, and then tap the desired ring time to wait before forwarding.
4. Press the Save soft key to accept the change.

CALL CONFERENCE

1. Press the Conference
2. Enter the number of the second party, and then tap Conference.
3. Press the Conference
conference.
4. Press the EndCall soft key to disconnect all parties.
soft key during an active call.
or tap the
Resume
or tap the soft key.
soft key during an active call. The call is placed on hold.
soft key
soft key during an active call. The call is placed on hold.
soft key when you hear the ring-back tone.
soft key during an active call. The call is placed on hold.
Transfer soft key when the second party answers.
->Features->Call Forward.
No Answer
soft key during an active call. The call is placed on hold.
soft key again when the second party answers. All parties are now joined in the
Ultra-elegant Gigabit IP Phone – SIP-T48S
Resume soft key.
.
.
Forward, tap the gray box of the After Ring
9
Quick Start Guide