Download Print this page

imovr TEMPO TREAD TOP STOOL Instructions

Download this manual

TEMPO TREAD TOP STOOL INSTRUCTIONS

INCLUDED PARTS

BASE

STEP 1

ASSEMBLE BASE

Take the pneumatic cylinder from its

protective carton and remove the

protective washer that is taped to

the narrow end, prior to assembly.

Insert the wider end of the pneumatic

cylinder into the center of the base.

STEP 2

OPTIONAL FOOT RING

If you purchased an optional foot ring, attach it now.

Loosen the hand knob until the opening is wide

enough to fit around the pneumatic cylinder. Attach

the ring to the cylinder, such that the black crossbars

are positioned below the chrome ring. Once you have

the foot ring in your preferred position, turn the knob

to secure it in place.

STEP 3

FINAL STEP

Insert the top end of the

pneumatic cylinder into the

bottom of the seat assembly.

PNEUMATIC

SEAT

CYLINDER

OPTIONAL PARTS

FOOT

RING

Page 1 TEMPO TREAD TOP STOOL INSTRUCTIONS INCLUDED PARTS OPTIONAL PARTS FOOT PNEUMATIC SEAT RING BASE CYLINDER STEP 1 ASSEMBLE BASE Take the pneumatic cylinder from its protective carton and remove the protective washer that is taped to the narrow end, prior to assembly.
Page 2 Parts repaired or replaced under this warranty are warranted for the remainder of the original warranty period. All freight costs for returns are the responsibility of other than iMovR. All C.O.D. or freight collect shipments will be refused. This limited warranty is the sole remedy for product defect and no other express or implied warranty is provided, including the products merchantability or fitness for a particular purpose.