Table of Contents
Advertisement
To check the current IP address or modify a new IP address for the Managed
Switch, please use the procedure as follows:
Show the current IP address
1. On "Switch#" prompt, enter "show ip interface vlan 1".
2. The screen displays the current IP address, subnet mask and gateway as shown
in Figure 4-5.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of Managed Switch
through the new IP address.
If you are not familiar with console command or the related
parameter, enter "?" anytime in console to get the help descrip-
tion.
Note
Figure 4-5: Showing IP Information Screen
9
Hide quick links:
Advertisement
Table of Contents
