Weather Scan; Us/International/Canadian Channels; Mem (Entering Channel Numbers Into Memory Scan) - Uniden Oceanus LTD1025 Owner's Manual

Full-featured vhf marine radio

Table of Contents

To cancel Channel 16/Channel 9 communications:

• Press 16/9 until previous channel setting appears.

—or—

• Press WX.

Weather Scan

To scan only Weather Channels 0 - 9, press WX, and then press and

hold STEP. The WX indicator will appear on the LCD Panel, indicating

Weather Mode.

To exit from Weather Scanning:

• Press and hold STEP to end scan.

• Press 16/9 to change to Channel 16/Channel 9 communications.

—or—

• Press WX to change to standard channel communications.

To select operation (communication and scanning) on US Channels,

press MEM, then press 16/9 while holding MEM. U (USA),

I (International), or C (Canadian) will appear on the LCD Panel.

Select the appropriate mode for operation.

You can enter channels into Memory Scan for instant scanning at any

time. When a channel is selected for Memory Scan, the MEM indicator

will appear on the LCD display.

To enter a channel number into Memory Scan, select the channel

number you want stored by pressing the CHANNEL L/M button, and

then press MEM.

Note:

In order for all functions of the OCEANUS to work properly, at

least two channel numbers must be entered into Memory Scan

before operating the radio.

Table of Contents

Show Quick Links

Table of Contents