Installing Lp Gas Tank; Insert Lp Gas Tank; Secure Lp Gas Tank; Connect Lp Gas Tank - Uniflame GBC873W-C Owner's Manual

GOLD
Assembly Instructions (continued)
25
Attach Grease Cup and Grease Cup Support
Outdoor LP Gas Barbecue Grill Model No. GBC873W-C

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.

Insert LP Gas Tank

Place precision filled LP gas tank upright into hole in the tank tray so the tank valve is facing
the gas line connection.

Secure LP Gas Tank

Slide the tank tray all the way back and secure by sliding tank retainer wire over shoulder of LP
gas tank.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or
in the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it
stops.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank valve is
"OFF".
Disconnect gas line from LP gas tank by turning knob
counterclockwise until it is loose.
Need a tank of gas? Try tank exchange service. It's easy, fast, safe,
and available at tens of thousands of conveniently located retail outlets
nationwide. You can purchase a new full tank or exchange your empty for
a precision filled one.