Installling Lp Gas Tank; Insert Lp Gas Tank; Secure Lp Gas Tank; Connect Lp Gas Tank - Uniflame GBC1059WB Owner's Manual

Assembly Instructions (continued)
17
Insert Grease Tray, Grease Cup and Regulator/Hose
Assembly
Outdoor LP Gas Barbecue Grill Model No. GBC1059WB
Installing LP Gas Tank
To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
grill.

Insert LP Gas Tank

Place precision filled LP gas tank upright into hole in grill body so the tank valve is facing the
gas line connection.

Secure LP Gas Tank

Turn wing nut clockwise until tight.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or
in the head of the burner and burner ports.
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is
"CLOSED".
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose.
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this grill.
Need a tank of gas? Try tank exchange service. It's easy, fast, safe,
and available at tens of thousands of conveniently located retail outlets
nationwide. You can purchase a new full tank or exchange your empty for
a precision filled one.