Table of Contents
Advertisement
Quick Links
NV Series FM
Transmitter -
Software
Update
Procedure
IS09004D
Issue 1.1 .................09 November 2009
Nautel Limited
10089 Peggy's Cove Road,
Hackett's Cove, NS, Canada B3Z 3J4
T.877 6 nautel (628835) or +1.902.823.2233
F.+1.902.823.3183 info@nautel.com
U.S. customers please contact:
Nautel Inc.
201 Target Industrial Circle, Bangor ME 04401
T.877 6 nautel (628835) or +1.207.947.8200
F.+1.207.947.3693 info@nautel.com
e-mail: support@nautel.com
www.nautel.com
© Copyright 2009 NAUTEL. All rights reserved.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nautel NV Series
Summary of Contents for Nautel NV Series
- Page 1 Hackett's Cove, NS, Canada B3Z 3J4 T.877 6 nautel (628835) or +1.902.823.2233 F.+1.902.823.3183 info@nautel.com U.S. customers please contact: Nautel Inc. 201 Target Industrial Circle, Bangor ME 04401 T.877 6 nautel (628835) or +1.207.947.8200 F.+1.207.947.3693 info@nautel.com e-mail: support@nautel.com www.nautel.com © Copyright 2009 NAUTEL. All rights reserved.
-
Page 3: Information Sheet
This procedure should be carried out by software revision and receive a new qualified station maintenance personnel compact flash card (which contains who are familiar with the NV series FM upgrade *.tgz file) or download *.tgz transmitter. file to a laptop or network location. -
Page 4: Transferring Upgrade File
IP Address: 10.10.10.2 window, select Close. Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.2 (h) Close the Network Connections window. Press Apply then Reboot Now. (d) Set the transmitter for Remote control. NV Series – Software Update Procedure Page 2 Issue 1.1 IS09004D... - Page 5 5 (a) through 5 (g), except in step 5 (d), cycle the ac power (switch off, then on) instead of selecting Reboot AUI. If still unsuccessful, contact Nautel. NV Series – Software Update Procedure Page 3 IS09004D Issue 1.1...
-
Page 6: Configuration Change
Record the new Scale Factor. Preset screen – to half its current value (record the original value). Press the Activate button. Continue reducing this setting if these symptoms continue. NV Series – Software Update Procedure Page 4 Issue 1.1 IS09004D... - Page 7 B indexes will have \B at the end in place of \A and there should exist an equivalent B index for every A index (same index # and description). NV Series – Software Update Procedure Page 5 IS09004D Issue 1.1...
- Page 8 (c7) Press RF Off then RF On. The transmitter should satisfy the (c3) Go to the Main screen and press requirements of step (c). RF On while monitoring the transmitter behavior. NV Series – Software Update Procedure Page 6 Issue 1.1 IS09004D...
- Page 9 Control Interface PWB requires replacement, you will need to All-Digital manually re-enter the new RF Drive Power Scale Factor after the original factory EEPROM is loaded into the replacement PWB. NV Series – Software Update Procedure Page 7 IS09004D Issue 1.1...
- Page 10 LUT Height” value is 0.500, increase LUT Height” value is 0.500, decrease the “Default LUT Height” to 0.545 (or the “Default LUT Height” to 0.444 (or 0.500 x 0.48/0.44). 0.500 x 0.32/0.36). NV Series – Software Update Procedure Page 8 Issue 1.1 IS09004D...
Need help?
Do you have a question about the NV Series and is the answer not in the manual?
Questions and answers