Seconique Corona Dinette Set Assembly Instructions

DINETTE SET

ASSEMBLY INSTRUCTIONS

IMPORTANT

PLEASE READ BEFORE YOU CONTINUE FURTHER

After unpacking this product please keep the original packaging in case it needs to be

returned for any reason.

• We recommend that you lay a blanket or sheet on the ﬂoor to avoid damage to both your

ﬂoor and the product.

• We strongly recommend that you keep children away from your work area.

• Never drag or push products as this could cause damage to the joints making it inferior.

• Do not place this product next to a radiator or in direct sunlight.

• Wood is a natural product and may expand if subjected to damp and may shrink or crack

if subjected to heat. Therefore it is recommended that room temperature is maintained,

with no sudden temperature ﬂuctuations.

• Do not place hot or chilled items directly on to the surface, use a place mat or marking

will occur.

• For general cleaning use a duster, and do not use detergents of any kind. However, the

surface will need to be retreated from time to time. This can be done by using block wax

(unperfumed) and rubbing it over the whole item.

• From time to time it may be necessary to tighten ﬁttings, regular inspections should be

carried out.

Table of Contents

Do you have a question about the Corona Dinette Set and is the answer not in the manual?

Page 1 DINETTE SET ASSEMBLY INSTRUCTIONS IMPORTANT PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason. • We recommend that you lay a blanket or sheet on the ﬂoor to avoid damage to both your ﬂoor and the product.
Page 2 Hardware Kit 3m x 3m Bench Side Section Table Top Bench Support Block Table Side Section Bench Foot Crossrail Bench Top Table Foot Hardware kit Table Support Block * Use of power tools to assemble this product will invalidate any claim and could damage this product making it unsafe!!! * Please assemble on a clean soft surface to avoid damage.
Page 3 FITTINGS * Please check contents and read the instructions before commencing assembly. * Please take care to avoid damaging parts during assembly. 7,0 x 60 Black O 8 x 30 4,0 x 40 7,0 x 80 Black 7,0 x 80 Black 08 x30 4,0 x 40 7,0 x 80 Black...
Page 4 7,0 x 60 Black 4,0 x 40 * Use of power tools to assemble this product will invalidate any claim and could damage this product making it unsafe!!! * Please assemble on a clean soft surface to avoid damage. PAGE 4...