Target room essentials 249-05-0297 Assembly Instructions Manual page 23

step 15.
1.
1.
(H13) x 1
wall anchor
2.
2.
Wood.
If fixing to wood
make sure that it
isn't chipboard as
screws can easily
pull away from the
core structure.
Drill 1/8 inch diameter
pilot hole, at the height
you marked with pencil
(picture 1).
Masonry or brick.
Wood. Drill 5/16 inch diameter Masonry or brick.
If fixing to wood pilot hole and 3/4 inch deep Drill 5/16 inch diameter
make sure that it into the wall at the height pilot hole and 3/4 inch deep
isn't chipboard as you marked with pencil. into the wall at the height
screws can easily Drive plastic plug into the hole, you marked with pencil.
pull away from the using an hammer if needed Drive plastic plug into the hole,
core structure. (picture 1 and 2). using an hammer if needed
Drill 1/8 inch diameter (picture 1 and 2).
pilot hole, at the height
you marked with pencil
(picture 1).
Cavity wall.
Drill 5/16 inch diameter Cavity wall.
pilot hole at the height Drill 5/16 inch diameter
you marked with pencil. pilot hole at the height
Drive plastic plug into the hole, you marked with pencil.
using an hammer if needed Drive plastic plug into the hole,
(picture 1 and 2). using an hammer if needed
(picture 1 and 2).
23