Seawater Washdown (If Equipped) - Bayliner 246 Discovery Owner's Manual Supplement

Chapter 6: Plumbing

Seawater Washdown (If Equipped)

FLOODING and SWAMPING HAZARD!
• NEVER leave your boat unattended while using the seawater washdown system.
• Any leak or break in this system may allow large amounts of water to flood the bilge, which
could swamp the batteries and the engine, and even sink your boat.
• Close the intake seacock when leaving your boat unattended for any length of time.
SYSTEM DAMAGE HAZARD!
BEFORE turning On the seawater washdown system, make sure the intake seacock is Open.
• Pressurize the seawater washdown
system by turning On the seawater
intake pump switch (the battery
switch must also be On).
• For the location of the seawater
washdown pump switch, see the
Component Locations section in
Chapter 2 of this supplement.
• Turn Off the seawater washdown
pump switch when you are done
using the system.
38
! WARNING!
! CAUTION
246 • Owner's Manual Supplement